Technical Description |
 |
|
DATA SHEET UNDER REVISION! Axial propeller pumps are used when large flow rates at small heads are required.
The HM 365.45 module is part of a series of units for the investigation of engines and machines. By means of the usage of electronic sensors in the entire series, it is possible to use PC data acquisition. The HM 365.45 is equipped with such data acquisition. In addition, it includes a supply tank, sensors for the recording of all relevant measured data and its display on a measuring amplifier. The motor necessary for drive is fitted to the HM 365 Universal Drive and Brake Unit. |
 |
Learning Objectives / Experiments |
The following experiments are possible in conjunction with the HM 365:
· Determination of the pressure-volume characteristic curve
· Power required by the pump
· Determination of the hydraulic power
· Determination of the efficiency
· Determination of the head
· Determination of the system characteristic curve |
|
|
|
Features
|
|
|
Investigation of the characteristics of an axial propeller pump
PC data acquisition |
|
|
|
| Specification |
[1] Module for the investigation of an axial propeller pump
[2] lxwxh 1100x850x1385mm, approx. 120kg
[3] Pipe work made of plastic
[4] Magnetic-inductive flow meter
[5] Stainless steel tank with sight glass
[6] 230V,~50Hz |
| Technical Data |
Pump 1kW at 1000rpm:
Max. capacity: 700ltr/min
Max. head: 1.75m
Measuring range of the measuring amplifier:
Flow rate: 0...833ltr/min
Temperature: 0...100°C
Intake pressure p1: –1...1bar
Delivery pressure p2: 0...0.6bar
Tank: 160ltr |
| Dimensions and Weight |
lxwxh : 1100 x 850 x 1385 mm
Weight : approx. 120 kg |
| Required for Operation |
| 230V, ~50Hz |
| Scope of Delivery |
| 1 experimental module, complete, 1 instruction manual |
| Order Details |
070.36545 HM 365.45 Axial-Flow Pump Module
|
|
