Home           Products           Company           Contact us     
> Fundamentals of Control Engineering
> Components and Calibration
> Simple Process Engineering Control Systems
> Complex Process Engineering Control Systems
> Fundamentals of Process Engineering
> Mechanical Process Engineering
> Thermal Process Engineering
> Chemical Process Engineering
> Biological Process Engineering
> Water Treatment
Products  |  Process Engineering  |  Simple Process Engineering Control Systems  |  RT 450.03
RT 450.03 Controlled System Module: Pressure Show data sheet (pdf file) Print page
Technical Description

  The RT 450.03 controlled system module is a panel-mounted ready-to-install element. In conjunction with other modular control components, it enables pressure control systems with different characteristic features to be constructed and investigated.

 

  The panel is mounted on the frame of the base module RT 450. RT 450.03 consists of two steel pressure tanks and is operated with compressed air as the working medium. Each tank is fitted with a manometer and a safety valve. One tank also has a drain valve. Both tanks can be fitted with a pressure sensor. The tanks are interconnected by a vent valve and can therefore be connected in series. This makes it possible to represent both first and second order pressure control systems.

 

  The RT 450 base module supplies the controlled system module with its working compressed air. Pneumatic hoses with quick-release couplings connect all the modules to a pressure control loop.
  

Learning Objectives / Experiments

- planning, setting up, testing, optimising and

  assessing pressure control loops with different

  objectives and components
  * constructing a 1st order pressure control system
  * constructing a 2nd order pressure control system
- design and function of
different instrumentation

  and control components
- technical terminology and
symbols in industrial

  control engineering
- practical exercises: Implementing process and

  signal lines
- commissioning and troubleshooting of process

  engineering systems

Features

* Main element in constructing a pressure control

  loop1
* Rapid installation into the RT 450 base module by

  modular panel assembly

 

Available accessories
RT 450 -- Process Automation Training System: Base Module 
RT 450.10 -- Continuous Controller Module
RT 450.12 -- Chart Recorder Module
RT 450.13 -- Digital Display
RT 450.14 -- Software for Controller Configuration
RT 450.20 -- Control Valve, Pneumatically Driven, Kvs 0,4
RT 450.23 -- Control Valve, Electrically Driven, Kvs 0,4
RT 450.30 -- Pressure Sensor, 0...6bar
RT 450.40 -- Visualisation Software
RT 450.41 -- Profibus DP Module for Controller
RT 450.42 -- PLC Module with Software
RT 450.43 -- Profibus DP Module for PLC
Alternative products
RT 030 -- Training System: Pressure Control, HSI
RT 532 -- Pressure Control Trainer
RT 634 -- Pressure Control Demonstration Unit
Overview
RT 450 Modular Process Automation Training System
Specification

[1] construction of a pressure control loop (in conjunction with other modules of the RT 450 series)
[2] ready-to-install compact panel assembly
[3] 2 pressure tanks with safety valves
[4] direct pressure indication by 2 manometers
[5] valve permits series configuration of both pressure tanks
[6] series configuration of pressure tanks: investigation of coupled controlled system response compared to single-tank operation
[7] 2 valves: 1x drain, 1x vent
[8] copper piping
[9] compressed air as working medium, supply via base module RT 450

 

Technical Data

Pressure tank
- capacity: 3L
- operating pressure: max. 6bar
- manometer: 0...10bar
Safety valve: adjustable to max. 10bar

 

Dimensions and Weight
LxWxH: 510x175x600mm
Weight: approx. 15kg
Scope of Delivery
2 pressure tanks mounted on panel, complete with valves and manometers
Order Details

080.45003  RT 450.03  Controlled System Module:

                      Pressure


Print
© 2005 G.U.N.T. Gerätebau GmbH