Home           Products           Company           Contact us     
> Fundamentals of Thermodynamics
> Applied Thermodynamics
> Renewable Energies
> Power Engines and Machines
> Internal Combustion Engines
> Refrigeration and Air Conditioning Technology
> Heating and Ventilation in Buildings
> Sanitary Systems
Products  |  Thermal Engineering and HVAC  |  Internal Combustion Engines  |  CT 159  |  CT 159.01
CT 159.01 Electronic Engine Indicating System for CT 159 Show data sheet (pdf file) Print page
Technical Description

The system is used in conjunction with the transducer sets CT 159.03, CT 159.04 and the CT 159.05. Each of the sets consists of a pressure transducer and a TDC sensor. It allows pressure measurements to be carried out in the cylinder head of an internal combustion engine and is designed for the CT 150, CT 151, CT 152 and CT 153 engines. The data is transferred to a PC for further processing. The software produces p-t and p-V diagrams, and also displays the average pressure and the indicated power output.
The system consists of software and a measuring amplifier for the pressure transducer and TDC sensor.

 

Learning Objectives / Experiments

- Familiarisation with and use of an electronic cylinder pressure
  indication system
- p-t diagram (top left)
- p-V diagram (bottom)
- Pressure curve for gas cycle (top right)
- Determination of indicated power output from p-V diagram

Features

* Cylinder pressure indication system, suitable for

  CT 150 - CT 153 test engines

Available accessories
CT 159.03 -- Pressure Transducer and TDC Sensor for CT 150 / CT 152
CT 159.04 -- Pressure Transducer and TDC Sensor for CT 151
CT 159.05 -- Pressure Transducer and TDC Sensor for CT 153
Alternative products
CT 100.13 -- Electronic Engine Indicating System for CT 110
CT 400.09 -- Electronic Engine Indicating System for CT 400
Specification

[1] Cylinder pressure indication system for internal combustion engine
[2] Only to be used in conjunction with CT 159.03, CT 159.04 or CT 159.05 transducers
[3] Chronological representation of pressure curve against the crank angle in p-t diagram to determine the maximum pressure and to monitor the ignition point and the pressure increase
[4] Representation of pressure curve against the standardised piston capacity in p-V diagram to determine the indicated power output
[5] System consists of measuring amplifier and software for Windows XP or Windows Vista

 

Technical Data

Measuring amplifier: amplification factor 10mbar/mV
TDC sensor trigger distance: 1mm

Dimensions and Weight
l x w x h: 270 x 250 x 100 mm (amplifier)
Weight: approx. 4 kg
Required for Operation
230V, 50/60Hz, 1 phase or 120V, 60Hz/CSA, 1 phase
Scope of Delivery
1 measuring amplifier
1 software + USB cable
1 instruction manual
Order Details
063.15901  CT 159.01  Electronic Engine 
                    Indicating System for CT 159
Print
© 2005 G.U.N.T. Gerätebau GmbH