Educational Lab Naval Architecture Teaching Equipment Ship Vibration Apparatus

Home

Products

Company

Engineering Mechanics and Machine Elements

>	Statics
>	Strength of Materials
>	Dynamics
>	Fundamentals of Engineering Design
>	Machinery Diagnosis
>	Properties of Materials

Mechatronics

Thermal Engineering and HVAC

Fluid Mechanics

Process Engineering

Overviews

Products | Engineering Mechanics and Machine Elements | Dynamics | HM 159.11

HM 159.11

Ship Vibration Apparatus

Technical Description

The HM 159.11 is used to investigate the dynamic behaviour of a ship structure. It therefore allows the first steps in the area of experimental vibration analysis or modal analysis.

Experimental vibration analysis is an indispensible element of modern shipbuilding development activity. This trainer allows the natural frequencies and modes of the model ship to be measured and recorded. The simple, stylised ship form simplifies the mathematical resolution of the problem. The model ship and an electrodynamic exciter are attached to a height adjustable cross beam. The beam has a high natural frequency that doesn't interfere with the measurements. A function generator creates different exciter signals: sinusoidal, triangular and rectangular signals. The frequency, amplitude and offset are adjustable. An acceleration sensor at various points measures the response of the model to the vibrations generated.
For experiments in water, a tank is required (not included).

Learning Objectives / Experiments

- Measurement and recording of natural frequencies
and modes of the model ship (in air)
- Influence of discrete additional masses or ballast
on natural frequency and mode (ballast and
additional masses not included)
- Vibration behaviour of model in air
- Vibration behaviour of floating model (possible with
additional tank)
- Comparison of theory (approximation formula for
determination of first bending natural frequency) and
practice (measured natural frequency)

Features

* Dynamic behaviour of a ship structure₁
* Simple ship form simplifies mathematical

calculations₁
* Different exciter signals possible₁
* Selectable exciter and measuring points

Alternative products

HM 150.06 -- Stability of Floating Bodies

Specification

[1] Vibration behaviour of a model ship in air or in water (with additional tank)
[2] Frame with height adjustable cross beam
[3] High natural frequency of cross beam due to closed box beam section with high rigidity and low weight
[4] Plastic model ship with elliptical half-breadth plan and 9 deck stringers
[5] Capacitive acceleration sensor with measuring amplifier
[6] Exciter with co-ordinated power amplifier and function generator: sinusoidal, triangular or rectangular signal
[7] Representation of measuring values on an oscilloscope possible (not included)

Technical Data

Exciter

- electrodynamic type with permanent magnet

- max. force: 8.9N

- frequency range: 5...12,000Hz
Function generator

- frequency, amplitude and offset adjustable

- output: 0...10Vpp, 50 Ohm
Acceleration sensor

- measuring range: +/-5g

- frequency range: 0...400Hz
Model ship

- deck stringer with fastening holes for sensors and suspension

Dimensions and Weight

l x w x h: 1800 x 400 x 1700 mm (frame)
l x w x h: 1200 x 200 x 150 mm (model ship)
Weight: approx. 50 kg

Required for Operation

230V, 50Hz, 1 phase

Scope of Delivery

1 frame

1 model ship, 4 tension springs, 1 measuring amplifier, 1 power amplifier, 1 exciter, 1 function generator, 2 multimeters, 1 acceleration sensor

1 set of cables

1 manual

Order Details

070.15911 HM 159.11 Ship Vibration Apparatus