This cooling tower with forced draught can be integrated into the cooling water circuit on the ET 830. Evaporation loss are compensated automatically. Temperature, atmospheric humidity and water flow rate are measured at the inlet and outlet of the cooling tower.
The tower is designed using corrosion-resistant materials suitable for outdoor use.
The cooling tower is connected to the electrical system and water system in the ET 830.
Learning Objectives / Experiments
- Energy balance
* Compact cooling tower for steam power plant ET 830
 Wet cooling tower with fan and pump for operation with the ET 830  Corrosion resistant materials used  Rotameters at inlet and outlet  Combined temperature/humidity measurement
- cooling capacity: approx. 115kW
- fan: 3900m³/h at 1450min-1
- pump: 20m³/h
- temperature: -10...50°C, 0...80°C
- pressure: 0...2,5bar, 0...4bar
- flow rate: 0...10m³/h, 0...20m³/h
- humidity: 2...95% r.h.
Dimensions and Weight
l x w x h: 1685x850x1805mm Weight: approx. 120kg
Required for Operation
400V, 50/60Hz, 3 phase or 230V, 60Hz, 3 phase (via ET 830)