Home           Products           Company           Contact us     
> Fundamentals of Thermodynamics
> Applied Thermodynamics
> Renewable Energies
> Power Engines and Machines
> Internal Combustion Engines
> Refrigeration and Air Conditioning Technology
> Heating and Ventilation in Buildings
> Sanitary Systems
Products  |  Thermal Engineering and HVAC  |  Applied Thermodynamics  |  WL 110.02
WL 110.02 Plate Heat Exchanger Show data sheet (pdf file) Print page
WL 110.02 - A product from the GUNT 2E range
Technical Description

  The key feature of plate heat exchangers is their compact design, in which optimum use is made of all of the material for heat transfer. The pressed in profile on the plates creates narrow flow channels, in which significant turbulence occurs. The turbulent flow allows effective heat transfer even with low flow rates and also has a self-cleaning effect. Plate heat exchangers are used in the food industry, offshore technology, refrigeration and domestic engineering.
  The WL 110.02 is part of a series of units enabling experiments to be performed on different heat exchanger types. In conjunction with the WL 110 service unit, which has a hot and cold water circuit and all of the necessary connections, the experimental unit is ideally suited for investigating the functioning and behaviour of a plate heat exchanger in operation.
  The WL 110.02 is connected to the WL 110 using quick-release couplings.  The plate heat exchanger is made up of profiled plates with water flowing through the spaces between them. The plates are soldered in such a way that two separate flow channels are formed. These are one “cold” and one “hot” flow channel, in an alternating arrangement. Hot and cold water flow continuously. Part of the thermal energy of the hot water is transferred to the cold water. Valves are used to adjust the flow of hot and cold water. The supply hose can be reconnected using quick-release couplings, allowing the flow direction to be reversed. This allows parallel flow and counterflow operation. The temperature sensors for measuring the inlet and outlet temperature are located at the supply connections on the WL 110.
  During experiments, temperature curves are plotted and displayed graphically. Additionally, the measured values can be recorded and processed using data acquisition software. The mean heat transfer

coefficient is then calculated as a characteristic variable.
  The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.

Learning Objectives / Experiments

In conjunction with WL 110 service unit
- function and behaviour during operation of a
  plate heat exchanger
- plotting temperature curves
  * in parallel flow operation
  * in counterflow operation
- calculation of mean heat transfer coefficient
- comparison with other heat exchanger types


* Plate heat exchanger for connection to
  WL 110 service unit

[1] plate heat exchanger for connection to WL 110
[2] hot and cold water supply from WL 110
[3] parallel flow and counterflow operation possible

[4] six soldered plates
[5] recording of temperature using WL 110

Technical Data
6 plates, stainless steel
Heat transfer area: 0,048m˛ 
Dimensions and Weight

LxWxH: 400x230x85mm

Weight: approx. 3kg

Scope of Delivery
1 plate heat exchanger
1 set of instructional material
Order Details
060.11002  WL 110.02  Plate Heat Exchanger
© 2005 G.U.N.T. Gerätebau GmbH