Home           Products           Company           Contact us     
> Statics
> Strength of Materials
> Dynamics
> Fundamentals of Engineering Design
> Machinery Diagnosis
> Properties of Materials
Products  |  Engineering Mechanics and Machine Elements  |  Dynamics  |  TM 620  |  TM 620.01
TM 620.01 Vibration Sensors with Clamping Set Show data sheet (pdf file) Print page
Technical Description

  The displacement of the rotor shaft studied in the experimental units TM 620 and TM 625 can be measured electronically using the sensors TM 620.01. The measuring principle based on induction works contactless and operates therefore without feedback. The measured values are not influenced. The output signal of each sensor is an analog DC voltage signal proportional to the position respectively displacement of the rotor. Clamping elements for the sensors are included. 

  The additionally required sensor supply module TM 151 supplies up to four of these sensors and processes their signals. An oscilloscope is most suitable to display the signals. 

  

Features

* Non-contact inductive position sensors1
* Optimal tool to record vibrations1
* Suitable for all experiments performed with TM 620

  and TM 625

Specification

[1] Accessory for TM 620 and TM 625

[2] 2 position sensors, non-contact, to measure the displacement of rotors without influencing measured values
[3] Analog signal output proportional to the rotor displacement
[4] Display of measuring signals on external oscilloscope

[5] Clamping devices included

[6] Wrench span for assembly: 36mm

[7] Sensor supply via the sensor supply module TM 151

 

Technical Data

Position sensor

- measuring principle: inductive, non-contact
- operating range: 5...10mm
- frequency range: 0...50Hz
- output signal: 1...9VDC proportional
 

Dimensions and Weight
Dxl: 30x60mm
Weight: approx. 0,24kg
Scope of Delivery

2 sensors with cable

2 sensor clamps

1 set of small parts

1 manual

 

Order Details

040.62001  TM 620.01  Vibration Sensors with

                                      Clamping Set


Print
© 2005 G.U.N.T. Gerätebau GmbH