Home           Products           Company           Contact us     
> Fundamentals of Thermodynamics
> Applied Thermodynamics
> Renewable Energies
> Power Engines and Machines
> Internal Combustion Engines
> Refrigeration and Air Conditioning Technology
> Heating and Ventilation in Buildings
> Sanitary Systems
Products  |  Thermal Engineering and HVAC  |  Internal Combustion Engines  |  CT 110  |  CT 100.13
CT 100.13 Electronic Engine Indicating System for CT 110 Show data sheet (pdf file) Print page
Technical Description

The system is used in conjunction with the CT 100.14 spark plug pressure transducer and the CT 100.15 respectively CT 100.16 pressure transducers. It allows pressure measurements to be carried out in the cylinder head of an internal combustion engine and is designed for the CT 100.20, CT 100.22 and CT 100.23 engines. The data is transferred to a PC for further processing. The software produces p-t and p-V diagrams, and also displays the mean pressure and the indicated power output.
  The system consists of an inductive TDC sensor, measuring amplifiers for the pressure transducer and TDC sensor and software.

 

Learning Objectives / Experiments

- Familiarisation with and use of an electronic cylinder pressure
  indication system
- p-t diagram (top left)
- p-V diagram (bottom)
- Pressure curve for gas cycle (top right)
- Determination of indicated power output from p-V diagram
 

Features

* Cylinder pressure indication system, suitable for

  CT 100.20, CT 100.22 and CT 100.23 test engines

Available accessories
CT 100.14 -- Pressure Transducer for CT 100.20
CT 100.16 -- Pressure Transducer for CT 100.22
Specification

[1] Cylinder pressure indication system for internal combustion engine
[2] Only to be used in conjunction with CT 100.14, CT 100.15 or CT 100.16 pressure transducer
[3] Chronological representation of pressure curve against the crank angle in p-t diagram to determine the maximum pressure and to monitor the ignition point and the pressure increase
[4] Representation of pressure curve against the standardised piston capacity in p-V diagram to determine the indicated power output
[5] System consists of measuring amplifier, TDC sensor and software for Windows XP or Windows Vista

Technical Data

Measuring amplifier: amplification factor 10mbar/mV
TDC sensor trigger distance: 1mm 

Dimensions and Weight
l x w x h: 270 x 250 x 100 mm (amplifier)
Weight: approx. 4 kg
Required for Operation
230V, 50/60Hz, 1 phase, 120V, 60Hz, 1 phase or 120V, CSA, 1 phase
Scope of Delivery
1 measuring amplifier
1 TDC sensor
1 software + USB cable
1 manual
Order Details
063.10013  CT 100.13  Electronic Engine 
                    Indicating System for CT 110
Print
© 2005 G.U.N.T. Gerätebau GmbH