Home           Products           Company           Contact us     
> Fundamentals of Thermodynamics
> Applied Thermodynamics
> Renewable Energies
> Power Engines and Machines
> Internal Combustion Engines
> Refrigeration and Air Conditioning Technology
> Heating and Ventilation in Buildings
> Sanitary Systems
Products  |  Thermal Engineering and HVAC  |  Applied Thermodynamics  |  WL 315C
WL 315C Heat Exchanger Trainer Show data sheet (pdf file) Print page
Technical Description

  This trainer compares tubular, shell and tube, finned cross-flow (water-to-air) and plate heat exchangers. A jacketed vessel with stirrer and tube coil is also included. To perform the experiments the individual heat exchangers can be conveniently selected using valves on the front of the trainer.

  Comprehensive instrumentation provides temperature and flow rate data. The measured values are transmitted directly to a PC via USB. The data acquisition software is included.

  A supply of hot and cold water is necessary for operation. This can be provided from the supplies in the laboratory or using the accessories for hot water supply (WL 312.10) and cold water supply (WL 312.11).

 
Learning Objectives / Experiments

- familiarisation with heat transfer processes
  * heat transfer
  * heat conduction
- measuring of relevant temperatures and flow rates
- determination of the heat transfer coefficient
- preparation of temperature curves for the various
  types of heat exchanger
  * parallel flow
  * counterflow
- comparison of various types of heat exchanger

  * plate heat exchanger
  * tubular heat exchanger

  * shell and tube heat exchanger

  * finned cross-flow heat exchanger

  * jacketed vessel with stirrer

Features
* Multipurpose trainer for examining various types
  of heat exchanger1
* Processing of the measured data on a PC1
* Detailed experiment instructions with complete
  illustration of theoretical fundamentals
Available accessories
WL 312.10 -- Hot Water Bench
WL 312.11 -- Cold Water Bench
WL 315.01 -- Water/Steam Heat Exchanger Unit
WL 315.02 -- Electrical Steam Generator 10kW
Alternative products
WL 110 -- Heat Exchanger Service Unit
Specification

[1] trainer for examining various types of heat exchanger

[2] electromagnetic flow meter

[3] finned cross-flow heat exchanger with fan

[4] switch cabinet with digital displays

[5] operating mode selected via valves

[6] water supply stations available for independent operation with closed water circuit (WL 312.10 and WL 312.11)

[7] GUNT software for data acquisition via USB under Windows Vista or Windows 7

 

Technical Data

Plate heat exchanger
- heat transfer surface area: approx. 0,26m
- capacity: 15kW
- 10 plates

Tubular heat exchanger

- heat transfer surface area: 0,1m

Shell and tube heat exchanger

- capacity: 13kW

Finned cross-flow heat exchanger

- heat transfer surface area: approx. 2,8m
- max. flow rate fan: 780m/h
- max. pressure difference fan: 430Pa

Jacketed vessel with stirrer

- heat transfer surface area (vessel): 0,16m
- heat transfer surface area (coil): 0,17m

 

Measuring ranges
- differential pressure air: 0...10mbar
- differential pressure water: 0...1.000mbar

- flow rate: 0...3m/h

- temperature: 0...100C

 

Dimensions and Weight
LxWxH: 2.010x800x1.760mm
Weight: approx. 300kg
Required for Operation
230V, 50/60Hz, 1 phase or 120V, 60Hz/CSA, 1 phase
Scope of Delivery

1 trainer

1 GUNT software CD + USB cable

1 manual

Order Details
060.315C0  WL 315C  Heat Exchanger Trainer
Print
© 2005 G.U.N.T. Gerätebau GmbH