Home           Products           Company           Contact us     
> Engineering Drawing
> Cutaway Models
> Dimensional Metrology
> Fasteners and Machine Parts
> Manufacturing Engineering
> Assembly Projects
> Maintenance
> Machinery Diagnosis
> Automation
Products  |  Mechatronics  |  Assembly Projects  |  MT 158
MT 158 Assembly Exercise: Ball Valve and Shut-off Valve Show data sheet (pdf file) Print page
Technical Description

  Shut-off valves, of  the design presented here, are used to shut off and restrict the flow of media. They must be capable of complete flow shut-off. Closure of the valve should be such that the volumetric flow does not suddenly drop to zero in order to prevent shock loads. The valve taper is moved by the spindle and makes a metallic seal against the seating ring pressed into the housing. The spindle is sealed by a packing gland. The joint between the housing and the clamp cover is sealed by a flat seal.
  Ball valves are used where media flows or pressures in pipelines need to be stopped quickly and easily, e.g. when valves and fittings are to be removed from a pressurised pipeline. They have a very low flow resistance when open, require little space due to the compact design, and have a self-cleaning sealing face. The sealing body is a ball with a cylindrical bore for straight-line flow throughput when the valve is fully open. The ball is rotated through 90 by way of a lever with spindle, enabling it to open or close the valve fully. 
  The practice kit MT 158 forms part of the GUNT assembly, maintenance and repair practice line designed for training at technical colleges and in company training centres. A close link between theory and practice is key to the learning content. 
  MT 158 enables two typical shut-off valves to be assembled and disassembled. Students become familiar with all the components and their modes of operation. The parts are clearly laid out and well protected in a tool box. Systematic assembly and disassembly of valves and fittings is practiced. The accompanying material details the individual

steps involved, and provides additional information on the areas of application, mode of operation and design of the fittings.

 

Learning Objectives / Experiments

- design and function of a ball valve
- design and function of a shut-off valve
- assembly and disassembly, including for the

  purposes of maintenance and repair
- replacing components (e.g. seal)
- comparison of 2 different valves and fittings

- reading and understanding engineering drawings

  and operating instructions
- leak testing (together with hydraulic valves and 
  fittings test stand MT 162)

Features

* Practical exercise based on the assembly of a ball

  valve and a shut-off valve1
* Comprehensive and well-structured instructional

  material

Available accessories
MT 162 -- Hydraulic Valves and Fittings Test Stand
Alternative products
MT 110.02 -- Assembly Exercise: Spur Wheel / Worm Gear Mechanism
MT 140.02 -- Assembly Exercise: Piston Compressor
MT 154 -- Assembly Exercise: Shut-off Valve
MT 156 -- Assembly Exercise: Wedge Gate Valve and Angle Seat Valve
MT 157 -- Assembly Exercise: Butterfly Valve and Non-Return Valve
MT 171 -- Assembly Exercise: Hydrodynamic Journal Bearing
MT 180 -- Assembly & Maintenance Exercise: Centrifugal Pump
RT 396 -- Pump and Valves and Fittings Test Stand
Specification

[1] learning concept for assembly exercises on valves and fittings
[2] shut-off valve, as set of parts

[3] 2-way ball valve, as set of parts

[4] complete assembly tool kit
[5] valve parts and tools housed in a sheet-steel tool box
[6] the kit forms part of the GUNT assembly, maintenance and repair practice line

 

Technical Data

Shut-off valve with flange connections
- DN 25, PN 16
- housing, hand wheel, clamp cover, packing gland
  

  frame: grey cast iron
- taper, seating ring, spindle, ring segment etc.: 

  stainless steel
Ball valve with flange connections
- DN 25, PN 16
- housing: C22

- ball: brass
- spindle, lever, disks etc.: galvanized steel

 

Dimensions and Weight

LxWxH: 690x360x315mm (box)
Weight: approx. 35kg

Scope of Delivery

1 complete set of shut-off valve parts 
1 set of replacement parts, consisting of:
- 2 packing glands for spindle sealing
- 16 steel balls for seating ring assembly
- 2 seals
1 complete set of ball valve parts
1 set of replacement parts, consisting of:
- 2 seal sets
1 set of tools, consisting of:
- 2 single-end wrenches: size 13, 17
- 1 Allen key, size 3
- 1 pin-type face wrench, adjustable
- 1 slotted screwdriver 5,5x1
- 1 punch
- 1 soft-faced hammer
1 set of nuts and bolts
2 rectangular boxes for small parts
1 sheet-steel tool box with foam inlay
1 set of instructional material, consisting of: 
  technical description of system, complete set of

  drawings with individual parts and parts list,

  description of assembly and disassembly

  processes, also in relation to repair operations

Order Details

051.15800  MT 158  Assembly Exercise:

                      Ball Valve and Shut-off Valve


Print
© 2005 G.U.N.T. Gerätebau GmbH