Home           Products           Company           Contact us     
> Engineering Drawing
> Cutaway Models
> Dimensional Metrology
> Fasteners and Machine Parts
> Manufacturing Engineering
> Assembly Projects
> Maintenance
> Machinery Diagnosis
> Automation
Products  |  Mechatronics  |  Maintenance  |  MT 185
MT 185

Assembly & Maintenance Exercise: In-Line Centrifugal Pump

Show data sheet (pdf file) Print page
In-Line Centrifugal Pump Trainer
Technical Description

  In-line centrifugal pumps are rotodynamic pumps and operate normally primed. In-line pumps are installed in the straight runs of pipelines. The difference between an in-line pump and a standard pump is that the intake and delivery connections of an in-line pump are on one axis.

  The in-line centrifugal pump presented here is used to pump mechanically and chemically non-aggressive liquids. Its range of applications include use in water supply, irrigation and sprinkler systems, and heating engineering systems.

The MT 185 kit forms part of the GUNT assembly, maintenance and repair practice line designed for training at technical colleges and in company training centres. A close link between theory and practice is key to the learning content. The kit is ideally suited to project-based learning with a particular emphasis on ‘hands-on’ work. Independent working by the students is assisted and encouraged. Performing exercises in a small team offers a useful learning format.

  MT 185 enables a typical in-line centrifugal pump to be assembled and maintained. Students become familiar with all the pump components and their modes of operation. The parts are clearly laid out in a tool box. Systematic assembly and disassembly of a pump is practiced.

  The instruction material details the individual steps involved in the exercise, and provides additional information on the areas of application, mode of operation and design of the pump.

 
Learning Objectives / Experiments
- design and function of an in-line centrifugal pump
  and its components
- assembly and disassembly for maintenance and
  repair purposes
- replacing components (e.g. seals or bearings)
- troubleshooting, fault assessment
- planning and assessment of maintenance and
  repair operations
- reading and understanding engineering drawings
  and operating instructions
Features
* Practical exercise on the assembly and maintenance
  of an in-line centrifugal pump1
* Comprehensive and well-structured instructional
  material
Alternative products
MT 110.02 -- Assembly Exercise: Spur Wheel / Worm Gear Mechanism
MT 140.02 -- Assembly Exercise: Piston Compressor
MT 152 -- Assembly Exercise: Spur Gear
MT 154 -- Assembly Exercise: Shut-off Valve
MT 156 -- Assembly Exercise: Wedge Gate Valve and Angle Seat Valve
MT 171 -- Assembly Exercise: Hydrodynamic Journal Bearing
MT 180 -- Assembly & Maintenance Exercise: Centrifugal Pump
MT 181 -- Assembly & Maintenance Exercise: Multi-Stage Centrifugal Pump
MT 182 -- Assembly & Maintenance Exercise: Screw Pump
MT 183 -- Assembly & Maintenance Exercise: Diaphragm Pump
MT 184 -- Assembly & Maintenance Exercise: Piston Pump
MT 186 -- Assembly & Maintenance Exercise: Gear Pump
Specification

[1] learning concept for maintenance and repair exercises on an in-line centrifugal pump
[2] enclosed pump impeller with 5 blades, designed for pure liquids
[3] pump shaft sealing with floating ring seal
[4] pump drive by 3-phase AC motor
[5] pump parts and tools housed in a tool box
[6] the kit forms part of the GUNT assembly, maintenance and repair practice line

 

Technical Data

In-line centrifugal pump
- power consumption: max. 0,75kW
- max. flow rate: 19m³/h
- max. head: 16m
- speed: 2.900min-1
- intake connection: DN 40
- delivery connection: DN 40
- housing and impeller: grey cast iron
Drive motor
- 400V, 50Hz, 3 phase; or 230V, 60Hz, 3 phase

 

Dimensions and Weight
LxWxH: 690x360x312mm (tool box)
Weight: approx. 40kg
Scope of Delivery
1 complete kit of an in-line centrifugal pump
1 set of tools, consisting of
- 5 combination wrenches size 13, 14, 17, 20, 22
- 2 Allen keys size 3, 8
- 1 screwdriver
1 sealing ring
1 box for small parts
1 tool box with foam inlay
1 set of instructional material, consisting of
- technical description of system, complete set of
  drawings with individual parts and parts list,
  description of maintenance and repair processes,
  suggested exercises
- 1 operator's manual for the industrial pump
Order Details
051.18500  MT 185  Assembly & Maintenance
                           Exercise: In-Line Centrifugal Pump

Print
© 2005 G.U.N.T. Gerätebau GmbH