The HL 962 assembly stands are connected to piping elements from HL 962.32 to form a single system. The tank system HL 962.30 is required so that the system can operate as a closed process.

The tank system consists of a large high-level tank with a mounting frame, a low-level tank and connections with shut-off devices to the PVC piping system HL 962.32.

  The high-level tank has a capacity of approximately 1.5m³ of water. A manometer close to the base of the tank measures the base pressure, thereby indicating the fill level. The high-level tank supplies the intake lines of normally primed centrifugal pumps, and ensures an adequate inflow head. Its intake and delivery line distribution points are located at a height of about 2m.

  The low-level tank is also supplied with water from the high-level tank. It is used for the self-priming side channel pump. A float valve ensures an adequate water level.

  All pumps transfer the water back to the high-level tank via the delivery line of the piping system.

All materials in the tank system are fully corrosion-proof, as they are all manufactured from plastic.

  The assembly stand (HL 962), tank system (HL 962.30) and piping system (HL 962.32) are interconnected by way of flanges. It is possible to expand the system and connect more assembly stands.