Home           Products           Company           Contact us     
> Fundamentals of Control Engineering
> Components and Calibration
> Simple Process Engineering Control Systems
> Complex Process Engineering Control Systems
> Fundamentals of Process Engineering
> Mechanical Process Engineering
> Thermal Process Engineering
> Chemical Process Engineering
> Biological Process Engineering
> Water Treatment
Products  |  Process Engineering  |  Mechanical Process Engineering  |  CE 283
CE 283 Drum Cell Filter Show data sheet (pdf file) Print page
Technical Description

Drum cell filters can be used to separate solids continuously from suspensions.

 

  The suspension unit CE 285 produces a suspension of diatomite and water. A pump conveys the suspension into the suspension tank of the drum cell filter. A stirrer keeps the solid particles in the suspension suspended. Part of the rotating drum dips into the suspension. The jacket of the drum is perforated and covered over with a filter cloth. The drum is divided into cells. Each cell is joined by a hollow shaft to a vacuum line. The vacuum sucks filtrate through the filter cloth into the drum. From there it is carried in a collector tank which is under vacuum. The solid is separated off at the filter cloth. Consequently, a filter cake which steadily grows in the direction of rotation is created on the immersed part of the drum. When the filter cake is drawn out of the suspension by the rotating motion, it is drained of water by the applied vacuum. A scraper scrapes the filter cake off of the drum before the drum dips back into the suspension. Compressed air can also be used to remove the filter cake. The filter cake drops into a collector tank.

  The flow rate of the supplied suspension is adjusted on the suspension unit. The level in the suspension tank of the drum cell filter can be adjusted by way of an adjustable overflow. The applied vacuum is indicated by a manometer on the vacuum tank. The rotation speed of the drum is infinitely variable.

  Compressed air and vacuum connections are required to operate the trainer.

  The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.

 

Learning Objectives / Experiments

- learning the basic principle and method of

  operation of a drum cell filter
- fundamentals of cake filtration: Darcy’s equation
- variation in time of filtrate quantity, filter cake mass

  and thickness
- filter cake mass and thickness dependent on

  filtrate quantity, vacuum and drum speed

Features

* Separation of solids from suspensions with a drum

  cell filter1
* Continuous removal of filter cake1
* Practical experiments on a laboratory scale

Specification
[1] continuous cake filtration of suspensions with a drum cell filter
[2] rotating perforated drum, partially immersed in suspension, with filter cloth
[3] vacuum inside drum to draw off filtrate and dry filter cake
[4] continuous removal of filter cake with adjustable scraper or compressed air
[5] drum speed infinitely variable
[6] plastic vacuum tank to collect filtrate
[7] suspension tank with stirrer and overflow
[8] plastic collector tank for filter cake
[9] production and transport of suspension with suspension unit CE 285
 
Technical Data

Drum
- filter area: approx. 0,1m2
- speed: approx. 0,1...3min-1
- motor power consumption: approx. 0,3kW
Stirrer
- speed: approx. 15min-1
- motor power consumption: approx. 0,12kW
Tanks
- filtrate vacuum tank: approx. 30L
- filter cake collector tank: approx. 30L
- suspension: approx. 3L
 

Measuring ranges
- vacuum tank pressure: -1...0bar
- cake remover compressed air: 0...2bar

 

Dimensions and Weight
LxWxH: 1.400x800x1.800mm
Weight: approx. 100kg
Required for Operation

230V, 60Hz/CSA, 3 phases or 400V, 50Hz, 3 phases
Vacuum and compressed air connections required
Water connection recommended

Scope of Delivery

1 drum cell filter

1 collector tanks

1 set of hoses

1 set of filter cloths
1 set of instructional material

Order Details
083.28300  CE 283  Drum Cell Filter
Print
© 2005 G.U.N.T. Gerätebau GmbH