Home           Products           Company           Contact us     
> Fundamentals of Control Engineering
> Components and Calibration
> Simple Process Engineering Control Systems
> Complex Process Engineering Control Systems
> Fundamentals of Process Engineering
> Mechanical Process Engineering
> Thermal Process Engineering
> Chemical Process Engineering
> Biological Process Engineering
> Water Treatment
Products  |  Process Engineering  |  Mechanical Process Engineering  |  CE 286
CE 286 Nutsche Pressure Filter Show data sheet (pdf file) Print page
Technical Description

  Nutsche Filters are used for discontinuous cake filtration of suspensions with high solid concentrations. The suspension production unit CE 285 produces a suspension of diatomite and water and delivers it from above into the Nutsche Filter. In the bottom flange of the Nutsche Filter is a recessed sieve base with a filter cloth. A growing filter cake accumulates on the filter cloth made from the separated solid material. The applied pressure in the top section of the Nutsche Filter pushes the filtrate through the filter cake and the filter cloth. It is collected in the bottom section of the tank. After filtering, the filter cake obtained is washed with a washing liquid (water) and is then dried by an air stream.
 

Learning Objectives / Experiments
- basic principle and method of operation of a Nutsche Pressure Filter
- fundamentals of cake filtration: Darcy's equation
- mass and thickness of filter cake dependent on filtrate quantity
Features
* Cake filtration with a Nutsche Pressure Filter
Specification

[1] Nutsche Pressure Filter for discontinuous cake filtration
[2] enclosed 3-part vessel with 2 flanges and 2 bumped bases
[3] bottom flange with recessed sieve base and PP filter cloth
[4] bottom section of vessel to collect filtrate
[5] centre section to form filter cake
[6] top section removable to remove filter cake
[7] maintenance and pressure control unit to adjust pressure in centre and top section
[8] 2 manometers to indicate pressure upstream and downstream of filter
[9] 2 sight glasses to observe level in bottom section
[10] production and transport of suspension with suspension production unit CE 285

 

Technical Data

Vessel
- inside diameter: approx. 300mm
- capacity: approx. 75L
- permissible pressure: -1...10bar
- permissible temperature: -10...100C
- material: stainless steel
 
Measuring ranges
- 2x manometers (D=160mm): 0...4bar
- 1x maintenance and pressure control unit:

  0.5...8.5bar

 

Dimensions and Weight
LxWxH: 600x900x1.900mm
Weight: approx. 120kg
Required for Operation
Compressed air and water connections required
Scope of Delivery
1 Nutsche Pressure Filter
1 filter cloth
1 set of instructional material
Order Details
083.28600  CE 286  Nutsche Pressure Filter
Print
© 2005 G.U.N.T. Gerätebau GmbH