Home           Products           Company           Contact us     
> Fundamentals of Control Engineering
> Components and Calibration
> Simple Process Engineering Control Systems
> Complex Process Engineering Control Systems
> Fundamentals of Process Engineering
> Mechanical Process Engineering
> Thermal Process Engineering
> Chemical Process Engineering
> Biological Process Engineering
> Water Treatment
Products  |  Process Engineering  |  Water Treatment  |  CE 582
CE 582 Water Treatment Plant 2 Show data sheet (pdf file) Print page
CE 582 - A product from the GUNT 2E range
Technical Description

  Depth filtration with sand filters and ion exchange are key unit operations in water treatment. CE 582 enables these two operations to be demonstrated.
   The raw water is pumped from above into a sand filter. Solids are captured and retained as the raw water flows through the filter bed. The filtered water emerges from the bottom end of the sand filter and then flows through two ion exchangers (cation and anion exchangers). In the process, unwanted ions are exchanged for hydrogen and hydroxide ions. The raw water is softened and desalinated. The sand filter and the two ion exchangers can be used in combination or separately. The solids deposited in the sand filter result in an increase in pressure loss. Backwashing cleans the filter bed and reduces the pressure loss. The ion exchangers can be regenerated with acid or caustic.
  The sand filter is equipped with a differential pressure measurement. There are also several pressure measuring points along the filter bed. The pressures are transmitted to the manometer panel via hoses and displayed there as water column. This can be used to plot Micheau diagrams. The flow rate, temperature, conductivity, differential pressure and system pressure are measured. The flow velocity in the filter bed (filter velocity) can be adjusted. Samples can be taken at all relevant points.
  A software program is provided to control the operating states and measure data. A process scematic shows the current operating states of

the individual components and the measured data.

  The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.
 

Learning Objectives / Experiments

- learning the fundamental principle of the unit

  operations depth filtration and ion exchange
- observation and determination of pressure losses
  in a sand filter
- plotting of Micheau diagrams
- principle of backwash
- identification of the different modes of operation
  of cation and anion exchangers
- regeneration of ion exchangers


 

Features

* Example of a water treatment plant 1
* Depth filtration and ion exchange 1
* Backwash of sand filters and regeneration of ion
  exchangers

Specification
[1] water treatment with depth filtration and ion exchange
[2] sand filter, cation and anion exchanger
[3] all processes usable separately or in combination
[4] backwash of sand filter
[5] regeneration of ion exchangers
[6] differential pressure measurement of sand filter
[7] manometer panel with 20 pipes to measure the pressures in the filter bed
[8] plotting of Micheau diagrams
[9] measurement of flow rate, temperature, conductivity, differential pressure and system pressure
[10] filter velocity adjustable
[11] LabVIEW software with control functions and data acquisition via USB under Windows XP or Windows Vista
 
Technical Data

Raw water pump
- max. flow rate: 420L/min
- max. head: 20m
Backwash pump
- max. flow rate: 50L/min
- max. head: 37m
Tanks for raw water and treated water
- capacity: each approx. 180L
 

Measuring ranges
- flow rate (raw water): 0...1.300L/h
- flow rate (regeneration): 0...25L/h
- manometer panel: 20x 0...1.500mm
- conductivity: 0...600μS/cm
- temperature: 0...50C
- filter velocity: approx. 0...75m/h
 

Dimensions and Weight
LxWxH: approx. 1.500x920x2.150mm (trainer)
LxWxH: approx. 1.300x800x1.150mm (supply unit)
LxWxH: approx. 750x640x1.900mm
(manometer panel)
Total weight: approx. 320 kg
Required for Operation
230V, 50Hz, 1 phase or 400V, 50Hz, 3 phases
Scope of Delivery

1 trainer
1 supply unit
1 manometer panel
1 packing unit of cation exchanger
1 packing unit of anion exchanger

1 set of hoses
1 LabVIEW software CD + USB cable
1 set of instructional material

Order Details
083.58200  CE 582  Water Treatment Plant 2
Print
© 2005 G.U.N.T. Gerätebau GmbH