Home           Products           Company           Contact us     
> Fundamentals of Thermodynamics
> Applied Thermodynamics
> Renewable Energies
> Power Engines and Machines
> Internal Combustion Engines
> Refrigeration and Air Conditioning Technology
> Heating and Ventilation in Buildings
> Sanitary Systems
Products  |  Thermal Engineering and HVAC  |  Renewable Energies  |  ET 220.01
ET 220.01 Wind Generator Show data sheet (pdf file) Print page
ET 220.01 - A product from the GUNT 2E range
Technical Description

  ET 220.01 is used as the experimental section for ET 220, in order to study the conversion of kinetic wind energy into electrical energy under weather conditions in a realistic way. To this end, ET 220.01 is connected to the ET 220 control unit via cables. The experimental section consists of a pole that can be folded down, and a wind generator.
  The speed of the rotor and the wind velocity are measured. The measured values are displayed on the control unit and in the ET 220 software.

 

Learning Objectives / Experiments

- Conversion of kinetic wind energy into electrical energy
- Function and design of a wind power station in stand-alone operation

  under real wind conditions
- Energy balance of a wind power station under real wind conditions

Features

* Conversion of kinetic wind energy into electrical

  energy 1
* Practical experiments under real wind conditions

Specification

[1] Experimental section for ET 220 for converting kinetic wind energy into electrical energy
[2] Movable wind generator that can be set up outside
[3] Four base supports for stabilisation
[4] Stand-alone operation with connection to ET 220
[5] Generator for converting the kinetic energy into electrical energy
[6] Accumulator for storing the electrical energy
[7] Measurement of wind velocity
[8] Measurement of the rotational speed of the rotor

 

Technical Data

Rotor
- diameter: 1200mm
- hub height above ground level: approx. 5000mm
Generator
- max. power: 350W
- voltage: 12VDC
- max. charging current: 30A
Rechargeable battery
- voltage: 12VDC
- capacity: 65Ah
Measuring ranges
- wind velocity: 0,7...50m/s
- speed: 0...3000min-1

Space requirement
- LxWxH: 10x6x6m
- max. distance from ET 220: approx. 20m

 

Dimensions and Weight

LxWxH: 5550x5550x5640mm (with base supports)
Weight: approx. 325kg

Scope of Delivery
1 wind generator
1 pole base
1 pole
4 base supports
1 accumulator
1 set of screws
1 set of tools
1 set of instructional material
Order Details
061.22001  ET 220.01  Wind Generator
Print
© 2005 G.U.N.T. Gerätebau GmbH